Perun ETU++ Airsoft Mosfet for G&G ETU Gearboxes

Specifications

• Brand: Perun
• Compatibility: Works with G&G ETU Airsoft Gearboxes
• Permissible Battery Voltage: 7v - 17v
• Max Fire Rate: 50 RPS
• Product Dimensions: 34mm x 12mm x 9mm

Features

• ETU++ is a dedicated replacement for G&G ETU electronic board. It enhances your trigger unit by adding many new, useful features. Simply disconnect the stock electronic board and plug in ETU++. The stock trigger unit (switch set) is retained, so there is no need to open the gearbox
• Independently programmed firing modes: Program the firing modes any way you like, setting safe, semi, burst or auto on both selector positions
• Active brake: Active brake stops the motor after each shot preventing spring compression or in case of replicas with high rate of fire, overspin (double shot problem)
• Precocking: Fast trigger response can be a matter of victory or defeat, especially in CQB situations. With precocking enabled, piston will remain in rear position after each shot with the spring already compressed, ensuring that next shot will be fired immediately after you pull the trigger. To release the spring after using precocking, pull the trigger and hold it for 2 seconds, after which a second shot will be fired, this time with no precocking and fully braked
• Binary trigger: Allows for easy double shots in semi-automatic setting. After enabling this mode, if semi-automatic fire is set, shots will be fired not only when the trigger is pulled, but also when it is released
• Rate of fire reduction: Reduce the rate of fire in automatic or burst fire to save ammo or make the replica shoot in a more realistic fashion
• DMR mode: Introduces intervals between semi-automatic shots to comply with DMR rules on some fields
• Low battery voltage alarm: Dedicated for Li-Po and Li-Ion batteries. Should the battery voltage fall to a dangerously low level, user will be notified by short sound signals that are repeated every minute. This may also be freely switch on and off
• Diagnostic system: Constantly monitors the replica and the mosfet itself. In case of any problems, immediately lets you know what it might be, making troubleshooting much easier
• Electronic fuse: Will save your replica and battery in case of a major malfunction. It will automatically disconnect the battery if a short circuit or blocked motor is detected

Package Includes: 1x Electronic Trigger Unit
Product Barcode: 5907622628139